Honda and Acura vehicles have some of the most annoying clips to remove. The step clip used on most of their vehicles has 4 individual locking tabs on each side and they are staggered so a locking tab will catch as you push the moulding into place. Push the molding down a little further and the next tab will catch. This is how Honda and Acura achieve that perfect fit, with an adjustable clip. This works great for them, but it is a nightmare for the technician. To remove this clip you must push in on one tab (on each side), pull the clip up about 1/16 , then the next set of tabs will catch and you must then push in on that set. Sometimes you must do this 4 times on each side just to remove one clip. Our ClipFork solves this problem by pushing down on all the tabs at the same time. When the ClipFork is inserted into the clip opening it pulls all of the locking tabs up past the retaining catch. Made of super tough 1/4 polycarbonate and thinned down to 1/8 to fit inside the clip release opening.