|
|
Home Page >>
All Scanners & Readers >>
All AutoXray Products
>> Current Page
EZ-LINK UPDATE
AutoXray tool and PC software update
information
The latest tool software version is
included in the PC software update. Update your PC software (PC-Link/EZ-PC/EZ-Update)
to the latest version using the EZ Web Update link below. PC-Link users will be
upgraded to EZ-PC free of charge.
The newest tool software version is 2.40, and is available for both 2 line (EZ-Link
and EZ-Read) tools as well as 8 line (for EZ-Scan). These files are named
rtv240_2.jcb (2-line display) and rtv240_8.jcb (8-line display) and are included
with the PC software update outlined below.
To update PC-Link/EZ-PC/EZ-Update to
the latest version (version 3.0):
The web update is free of charge. To update an existing EZ-PC
or EZ-Update application, or to upgrade your PC-Link application to EZ-PC,
follow the below update instructions:
- Click the Update to Latest Version
link below.
- When prompted to Open, Run, or Save the
EZWebUpdate.exe file, select Open or Run.
- Follow the EZ Web Update Wizard
instructions to update an existing application(s).
Note: The PC-Link application is being
replaced with EZ-PC since it's compatible with all of AutoXray's latest
technology.
Update to Latest
Version of EZ-PC/EZ-Update Application
To update your EZ-Link/EZ-Scan/EZ-Read
tool to the latest version (2.40):
The scanner updates are free of charge, however the EZ-PC or EZ-Update PC
application is required to update a scanner to the latest version. To update a
scanner to the latest version, follow the below update instructions:
- You must complete the EZ Web Update outlined above.
This will ensure that the rtv240_2.jcb and rtv240_8.jcb files are in the EZ-PC/issue
or EZ-Update/issue directory.
- Launch EZ-PC or EZ-Update.
- Select the "ToolLink->Upload new tool
software release" menu item.
- Select the appropriate update file (rtv240_2.jcb for
EZ-Link and EZ-Read 2-line tools, or rtv240_8.jcb for EZ-Scan 8-line tools)
from the drop-list.
- Enter the serial number of the scanner (either on
the back of the scanner or underneath the batteries in the battery
compartment).
- Select the appropriate COM port (use Auto-detect if
you are unsure).
- Connect the 9-pin serial cable into the PC, and
connect the other cable into the port on the top of the tool.
- Power on the scanner, press CONFIG then arrow down
to DOWNLOAD and press ENTER. Press ENTER to confirm. On some tools, the
display will read 'Downloading, please wait', and on others the display will
be blank.
- Click the UPDATE button and follow the onscreen
messages.
Update to Latest
Version of EZ-Scan/EZ-Read/EZ-Link
|
|