Application Card For The MPC, Pro-Link Plus And Pro-Link Graphiq.
FEATURES:
- Bendix tractor and trailer support
- End of line test
- Loaded voltage test
- Trailer odometer reading/setting
- J1939 datalink status
- Modify ECU configuration:
- J1587/J1708/J2497/J1939 broadcast options
- NEW added support for ABS6 and TABS6 ECUs
- Power Line Carrier (PLC) Test application for trailer ABS
Kit Includes: Application card and Manual
|
PCMCIA |
The Bendix ABS/ATC application software provides the capability to test and diagnose vehicles using EC-15, EC-16, EC-17 and EC-30/30T (Tractor and Trailer) Bendix systems. To address advanced capabilities provided by Bendix, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Bendix. The following list contains all of the features and functions available with this card. |
FUNCTIONS |
Display fault codes
Display front, middle and rear MPH
Check battery voltage
Check warning and traction lamps
Check engine and retarder datalink
Check retarder relay
End of line test
Runs ABS system component tests | System configuration adjusts tire size
Change settings of system parameters
Clears active and history faults
Snapshot mode for capturing intermittent problems
Create custom data lists
Printer output capabilities
|
POWER LINE CARRIER (PLC) TEST APPLICATION FOR TRAILER ABS |
Effective March 2001, a Federal Government mandate required that heavy-duty trucks have an in-cab trailer ABS warning lamp. Using a new SAE standard called PLC communication, the change requires trailer ABS ECU's to communicate with the tractor ECU via the J560 power line to activate the warning lamp. NEXIQ's PLC Converter (sold separately) is also required for PLC communication. The PLC test application is easy to use and provides the ability to: |
Verify trailer ABS ECU for MID 10 and MID 11 messages.
Toggle in-cab trailer ABS warning lamp ON/OFF to confirm operation.
Test tractor and trailer coupled or trailer independently for MID messages. |
Notes: |
- The MPC (Multi-Protocol Cartridge P/N MPI-208040) will need to be purchased separately if you do not already have this part.
- Requires NEXIQ PLC Converter Kit (P/N MPI-601020)
|
For Shipping Rates Please Click Here (A new window will open — simply close window to continue shopping.)