• State of the Art ergonomic design and styling for easier handling and use when compared to conventional multimeters
• Full control manual range selection
• Large 3½ digit LCD display
• AD/DC Voltage measurement up to 600 Volt
• Resistance measurement up to 2 MOhm
• Continuity test (with audible indicator)
• Diode test
• Display data hold
• Overload protection
• Integrated test leads

 Applications

Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.

Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.

Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.

An essential tool for all around troubleshooting of electrical and electronic circuit and systems.

 For use in:

• Automobiles, Trucks, Trailers, Boats, RVs
• 0 to 600 Volts AC/ DC powered circuits.

 Ergonomic Features:

• Keep sight of testing point while reading the display
• No need for a resting place as with conventional multimeters
• Single hand range and scale selection while testing
• Large easy to read 1/2" (12.5 mm) digits display
• Comfortable grip allows holding as a pen or a handle
• Rugged plastic enclosure

 Technical Specifications:

General Specifications:

• Display:
  • 3½ Digit LCD (Max reading 1999)
  • 1/2" (12.5 mm) Digits
  • Automatic( - ) negative polarity indicator
  • Automatic Zeroing
  • Automatic over-range indication
  • Low battery indicator
• Power source: Standard 9 Volt alkaline battery type Duracell MN1604
• Physical dimensions: 9" (L) x 1.57" (H) x 1.18" (D) - 230 (L) x 40 (H) x 30 (D) mm
• Weight: Approximately 5.8 Oz (165 g) Including battery

Electrical Specifications:

• DC Voltage: ±0.8% + 1dgts., 1MOhm input impedance, 600 V ac/dc Overload protection
• AC Voltage: ±1.5% + 10 dgts., 450KOhm input impedance, 40 to 200 Hz, 600 V ac/dc Overload protection
• Resistance: ±1.0% + 3 dgts., 250 V ac/dc overload protection
• DC Current: ± 2.0 % + 2 dgts., Internal 200mA/250V fuse protection
• Diode test: 1.0 ± 0.6 mA test current, 3.2 V max. test voltage